€22.00
SUPER CHAMPION brass chain guide collar
CONDITION : Second-hand product in very good condition (see photos)
NOTE : 8.9/10
Filter By
Filter By
ROAD
Subcategories
€18.00
Seatpost model: PAZZAZ
Material : Aluminum
Tube diameter: Ø 27.2
Length (carriage axis / bottom of tube): 250 mm
CONDITION: Used product in very good condition despite the oxidized carriage screws (see photos)
RATING:...
€52.00
MODEL: MAVIC cassette compatible Shimano Hyper Glide
SPEEDS: 10 speeds
GABLES: 12/13/14/15/17/19/21/23/25/30
CONDITION: NEW product disassembled from an exhibition bike
RATING: 10/10
€44.00
Rim 700 model: MAVIC MA3
Number of holes: 32 holes
Pneumatic Type: Tire
Verified weight: 505 grams
CONDITION: NEW product from old stocks, may have some slight traces of storage
RATING: 10/10
€38.00
Pair of PATRICK shoes, Bernard Hinault model sold with its original wedges
SHOE SIZE : 38
CONDITION: NEW product from old stocks
RATING: 10/10
€1.80
Inner tube, ATOO model
- 16 x 1.75 / 2.00
Presta Valve
NEW product from old stocks
RATING: 10/10
€1.80
Inner tube, ATOO model
- 16 x 1.75 / 2.00
Schrader Valve
NEW product from old stocks
RATING: 10/10
€1.80
Inner tube, HUTCHINSON model
- 500A x 28/ 42 Balloon
Presta Valve
NEW product from old stocks
RATING: 10/10
€1.80
Inner tube, INNER TUBE CITY model
- 12" x 1.75 / 1.90
Presta Valve
NEW product from old stocks
RATING: 10/10
€1.80
Air chamber, MASSI model
- 16" x 1.75 / 2.125
Schrader Valve
NEW product from old stocks
RATING: 10/10
€35.00
First-generation MAVIC rear hub with black plastic covers (COLLECTOR)
Hole pattern: 36 holes
Axle spacing: 122 mm
Freewheel thread: French 34.7 x 1
Material : Aluminium
CONDITION: Second-hand product in very good...
€20.00
Plateau model : SPECIALITIES TA
Number of teeth : 30 teeth
BCD : 74
CONDITION : new Product from old stock
NOTE : 10/10
€28.00
Rear hub, MAVIC 520 model
Hole pattern: 36 holes
Axle spacing: 126 mm
Freewheel thread: BSA 1.375 x 24Tpi
Material: Aluminium
CONDITION: Used product in very good condition (sold WITHOUT clamping pin)
NOTE : 8.4/10
€48.00
Front hub MAVIC, with a width of 120 mm, I have found no information on this particular model, it would seem that it is a prototype !!!
Drilling : 36 holes
Between axis : 120mm
Material : Aluminum
CONDITION : used...
€5.00
Patch advertising MAVIC set 1000 plastic effect velour
New product and original (not reproduction)
SIZE : 80 x 80 mm
€22.00
Sets of 2 DECALCOMANIE original rims SUPER CHAMPION
New product and original (not reproduction)
ATTENTION : the product of the time impossible to know the reaction to the use during the installation, no recovery...
€4.00
Sealed bearing on 2 sides, model NSK 6001 NS7S for hubs mavic 500 / 501 etc., also compatible with some Mavic wheels new generation.
New product véndu to the unit
€12.00
MODEL : PAZZAZ
LENGTH : 110mm
Ø STEERER : 1 1/8
CLAMP HANDLEBAR Ø : 31.8 (Oversize)
VERIFIED WEIGHT : 164 grams
CONDITION : its condition is very good
NOTE : 8.5/10
English
Français
Deutsch
Español
Italiano