€135.00
Rear hub, model
Drilling : holes
Between axis :
Material : Aluminum
CONDITION : used Product in very good condition
NOTE : /10
Filter By
Filter By
WHEELS
Subcategories
€30.00
MTB tire, MICHELIN X-COUNTRY RACE model
SIZE: 27.5 x 2.25
CONDITION: NEW product from destocking
RATING: 10/10
€62.00
26 Inch MTB rim model: MAVIC CROSSLAND + tubeless flap
Number of holes: 24 holes
Pneumatic type: Tubeless tire with original flap
Verified weight: 526 grams
CONDITION: NEW product from old after-sales service stocks,...
€40.00
26 Inch mountain bike rim model: MAVIC CXP 33
Number of holes: 36 holes
Pneumatic type: Non-Tubeless Tire
Verified weight: 422 grams
CONDITION: NEW product from old stocks, may have some slight traces of storage...
€30.00
26 Inch mountain bike rim model: MAVIC 221
Number of holes: 36 holes
Pneumatic type: Non-Tubeless Tire
Verified weight: 442 grams
CONDITION: NEW product from old stocks, may have some slight traces of storage
RATING:...
€5.50
Front wheel clamping pin, purple anodized model
ATTENTION: front wheel clamping only
HUBS WIDTH: Front 100 mm
CONDITION: NEW product from old stocks
RATING: 10/10
€1.80
SCHWALBE AV 1 inner tube
- 12 1/2 x 1.75
- 12 x 2.10
- 12 1/2 x 2 1/4
Schrader Valve
NEW product from old stocks
RATING: 10/10
€1.80
Inner tube SCHWALBE AV 10
- 24 x 1.75 / 2.50
Presta valve
NEW product from old stocks
RATING: 10/10
€1.80
Inner tube, ATOO model
- 24" x 1.5 / 2.0
Schrader Valve
NEW product from old stocks
RATING: 10/10
€27.00
Front Hub, SPECIALIZED STUNT 29 disc model
Drilling : 32 holes
Between axis: 100 mm
Material: Aluminum
CONDITION: Used product close to new
RATING: 9.7/10
€10.00
Front hub, model SHIMANO anthracite grey (not found reference model)
Drilling : 32 holes
Between axis : 100 mm
Material : Aluminum
CONDITION : new Product from old stock which may show some traces
NOTE : 10/10
€1.80
SCHWALBE SV 9 inner tube
- 600 A
- 24 x 1.75
- 24 x 1 1/8 - 1 1/4 - 1 3/8
Valve: Presta
NEW product from old stocks
RATING: 10/10
€5.00
Tyre IMPAC GETAWAY
Size : 16 x 1.90
CONDITION : new Product from old store, stored in good conditions.
NOTE : 10/10
€28.00
Front hub, model COMMENCAL disc brake 6-hole international Standard
Drilling : 32 holes
Between axis : 100 mm
Material : Aluminum
CONDITION : used Product in perfect condition
NOTE : 9.4/10
€22.00
Front Hub, MAGURA KRONE model
Drilling: 32 holes
Between axis: 100 mm
International standard 6-hole disc brake mounting
Material: Aluminum
CONDITION: Its condition is very good
RATING: 8.5/10
€28.00
Front hub, model
Drilling : holes
Between axis : 100mm
Material : Aluminum
CONDITION : used Product close to the NINE except the clamping spindle quiprésente a slight scuffing (see photos)
RATING : 9.2/10
€10.00
Front hub, model SRAM 7.0
Drilling : 32 holes
Between axis : 100mm
Material : Aluminum
CONDITION : NEW
NOTE : 10/10
English
Français
Deutsch
Español
Italiano