€22.00
Pair of aluminium PENA nail pullers
CONDITION : NEW product from old stocks
NOTE : 10/10
Filter By
Filter By
OTHER VARIOUS
€5.00
Dogwood to be inserted into the bottom of the fork steerer tube to strengthen and secure the fork. Fixing is via the through-bolt in the front brake.
Length: 85 mm
Diameter: 20 mm
CONDITION : NEW product from old...
€8.00
Cable tensioners to fit over the transmission sheaths to adjust the settings, SHIMANO model.
CONDITION : NEW product from old stocks
NOTE : 10/10
€3.50
Chromed plastic chain rest to clip onto the right chain stay to rest the chain when removing the wheel.
CONDITION : NEW product from old stocks
NOTE : 10/10
€3.50
Stainless steel saddle clamping screws
Insert diameter: 7.90 mm
Total length clamped: 23 mm (measurement recorded between the 2 collars)
Diameter of the flanges: 12 mm and 10 mm
CONDITION: NEW product from old stocks...
€4.00
Small fabric pennant with hole for fastener, model "Edouard Fachleitner"
Size: 15cm x 9cm
CONDITION: NEW product from old stocks with traces of oxidation at the rivet and a slight discoloration of the fabric following...
€7.50
Small COLUMBUS PIN in metal
Color: Red
Size: 15mm x 10mm
Product new and original COLUMBUS not a reproduction.
€10.00
Aluminum plate printed, very nice reproduction of an old plate glazed and rusty, model TEAM RALEIGH horizontal
MATERIAL : Aluminum
SIZE : 200 mm x 300 mm
CONDITION : new Product
NOTE : 10/10
€10.00
Aluminum plate printed, very nice reproduction of an old plate glazed and rusty, model SACHS horizontal
MATERIAL : Aluminum
SIZE : 200 mm x 300 mm
CONDITION : new Product
NOTE : 10/10
€12.00
Aluminum plate printed, very nice reproduction of an old plate glazed and rusty, model COLNAGO black vertical
MATERIAL : Aluminum
SIZE : 200 mm x 300 mm
CONDITION : new Product
NOTE : 10/10
€10.00
Aluminum plate printed, very nice reproduction of an old plate glazed and rusty, model CINELLI
MATERIAL : Aluminum
SIZE : 200 mm x 300 mm
CONDITION : new Product
NOTE : 10/10
€3.50
Screw NEW specific for clamping of TDS on frame Vitus with system "VisTampon" Ø10 clamp, screw back.
Model Generic
ATTENTION: Price for 1 screw
€3.00
Small oiler aluminum can with thread M5, ideal for hubs or housings bracket.
New product can present some traces after years of storage.
€2.00
Small medallion of a pin on your panniers for bicycle touring or elsewhere, this model is new still packaged and its size is 55mm x 35mm.
English
Français
Deutsch
Español
Italiano