€18.00
Model chainring: No visible brand
Number of teeth: 28 teeth
BCD: 86
CONDITION : Near-new used product
NOTE : 9.7/10
Filter By
Filter By
Mountain BIKING
Subcategories
Filter By
€12.00
White aluminium brake bar to prevent deformation of forks and seatstays when braking hard.
CONDITION : NEW product from old stocks
NOTE : 10/10
€2.50
Safety system for old school mountain bikes equipped with cantilever brakes, accessory to be fixed on the fork (see photos)
ATTENTION: Fork not supplied in the sale
CONDITION: NEW product from old stocks
RATING: 10/10
€34.00
Seatpost model: FUNKEDUP.COM
Material: YELLOW anodized aluminum
Tube diameter: Ø 27.2
Length (carriage / bottom tube shaft) :
CONDITION: NEW product with some traces of storage (see photos)
RATING: 9.8/10
€12.00
MODEL: ACOR
LENGTH: 120 mm
Ø PIVOT: Aheadset 1" 1/8
Ø HANDLEBAR: 25.4
CONDITION: NEW product from old stocks
RATING: 10/10
€22.00
MODEL: without apparent mark, but very light
LENGTH: 130 mm
Ø PIVOT: Aheadset 1" 1/8
Ø HANDLEBAR: 31.8
Verified weight: 141 grams
CONDITION: Used product in very good condition
RATING: 8.7/10
€12.00
MODEL: Pair of cork bicycle grips with clamping rings, RED model
CONDITION: NEW product from destocking
RATING: 10/10
€5.00
Set of 4 skates, ATOO screw model
CONDITION: New product from old stocks
RATING: 10/10
€5.50
Front wheel clamping pin, purple anodized model
ATTENTION: front wheel clamping only
HUBS WIDTH: Front 100 mm
CONDITION: NEW product from old stocks
RATING: 10/10
€35.00
Vintage winter cycling jacket, SERVARY model with zipped back pockets
SIZE: 3
The measurements are :
A = 500 mm
B = 550 mm
C = 630 mm
SLEEVES: 640 mm
CONDITION: NEW and ORIGINAL product from old stocks, may require...
€37.00
Vintage winter cycling jacket, SERVARY model with zipped back pockets.
SIZE: 4
The measurements are :
A = 510 mm
B = 560 mm
C = 650 mm
SLEEVES: 640 mm
CONDITION: NEW and ORIGINAL product from old stocks, may require...
€10.00
MODEL: matt chrome steel mountain bike stem
LENGTH: 120 mm
Ø SWIVEL : 25.4 (1" 1/8)
Ø HANDLEBAR: 25.4 mm
CONDITION: NEW product from old stocks
RATING: 10/10
€10.00
MODEL: No name chrome steel
LENGTH: 110 mm
Ø SWIVEL : 25.4 (1" 1/8)
Ø HANDLEBAR: 25.4 mm
CONDITION: NEW product from old stocks
RATING: 10/10
€10.00
Plateau model : steel triple-trayNumber of teeth : 22 teethBCD : 58CONDITION : new Product from old stockNOTE : 10/10
€2.50
Set of 2 brake pads, model CANTILEVER Rod, also compatible with calipers MAFAC
CONDITION : new
NOTE : 10/10
€20.00
Pair caliper brake cantilever model MIRANDA resin
CONDITION : new Product from old stock
NOTE : 10/10
€4.00
Set of 2 pads EBC (CFA 332) for disc brake model, QUAD TAIWAN GREEN color reserved for the XC
CONDITION : new
NOTE : 10/10
€10.00
Pair of bearings MGM RADAX 6003 (double étanchétité), for the case of pedals.
Compatible with the bikes of René Herse, Alex Singer, and certainly other rider craft of this period.
Also compatible with bikes of mark...
€21.00
The T-Shirt BRIKO-BIKE is finally here !!!
-Textile 100% cotton quality, thick 203Gr/M2 pre retrécit
- NAVY BLUE color
- Printing in the fiber to resist to the time and successive washings.
- Sizes available S / M / L...
€21.00
The T-Shirt BRIKO-BIKE is finally here !!!
-Textile 100% cotton quality, thick 203Gr/M2 pre retrécit
- Color: BLACK
- Printing in the fiber to resist to the time and successive washings.
- Sizes available S / M / L /...
English
Français
Deutsch
Español
Italiano